Power Limiter

      Electricity is one of the major sources of power in this world, but along with its utilization, a major portion of it is wastage and stealing. Electricity board is facing a lot of problem in conservation of electric power. We realized the problem and work over it. From this we got the inspiration to design a POWER LIMITER.    

         Earlier we were using fuse for protection from over- load, fuse is a device, which operates on overload (current). If the excessive current flows through the circuit then the fuse wire melts and it is to be replaced after every operation rating of fuse wire used. To overcome the drawback of fuse, Circuit Breakers are used to break the circuit. . These are used in power grids substations and now a days miniature circuit breakers are used for domestic purpose. During overload it breaks the circuit by separating the moving contact. This moving contact is to be settled manually.
      Circuit beakers are very common device being used by electrical persons for switching ON/OFF the electrical loads. But the load switching is required automatically day or night, switching is required with respect to time period, switching is required with respect to applied load and all this continuously and automatically. An attempt is made to design such system, which would do above switching automatically. Such system would eliminate fuse links operators job to switch the load to ON/OFF at different time intervals etc hence we are designing a system which can perform all above mentioned jobs automatically and called as POWER LIMITER.